Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    ip pim spt-threshold

    Syntax

    [ no ] ip pim spt-threshold { 0 | nonzero_integer | infinity } [ group-list ipAccessList ]

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Specifies the network configuration that PIM sparse mode uses when a source starts sending multicast messages. The no version restores the default value, 0.

    Options

    • 0—Configures PIM sparse mode to switch to an SPT when a source begins to send multicast messages
    • nonzero_integer—Integer in the range 1–4294967294; prevents PIM sparse mode from switching from a shared tree to an SPT
    • infinityPrevents PIM sparse mode from switching from a shared tree to an SPT
    • ipAccessList—Name of the IP access list that specifies the groups to which the threshold applies

    Mode

    Global Configuration

    Published: 2014-08-14