Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    ip pim dr-priority


    ip pim dr-priority priority

    no ip pim dr-priority

    Release Information

    Command introduced in JunosE Release 9.0.0.

    Router Configuration mode added in JunosE Release 10.0.0.


    Assigns a priority for the interface to be selected as the designated router. An interface with a higher priority value is preferred as a designated router over an interface with a lower priority value. In Interface Configuration mode, the no version restores the value that is specified in Router Configuration mode. If the designated router priority is not specified in Router Configuration mode, then the default value of 1 is restored.

    Note: You cannot configure the designated router priority on PIM dense mode interfaces.


    • priority—Value in the range 1–254; default value is 1.


    Interface Configuration, Router Configuration

    Published: 2014-08-14