Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    ip nat inside source list

    Syntax

    ip nat inside source list accessListName pool poolName [ overload ]

    no ip nat inside source list accessListName

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Creates dynamic translation rules that are applied to a source address when routing a packet from the inside network to the outside network, and for translating the destination address when a packet returns from the outside network to the inside network. The no version removes the dynamic translation rule.

    Note: This command does not remove any dynamic translations from the translation table.

    Options

    • accessListName—Name of the access list that you want to use for this dynamic translation
    • poolName—Name of the NAT IP address pool that contains addresses you want to use when translating matched access list addresses
    • overload—Specifies that the translation process create extended translation table entries (IP address, protocol, and port values)

    Mode

    Global Configuration

    Published: 2014-08-14