Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    ip ignore-df-bit

    Syntax

    [ no ] ip ignore-df-bit

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Specifies that the router ignores the don't-fragment bit (DF) if present in the IP header of packets crossing the configured interface; the router then fragments packets even if the bit is present. The no version restores the default behavior, which is to consider the DF bit before fragmenting.

    Note: You can also use RADIUS VSA [26-70] to configure the router’s DF bit support. The action configured by the RADIUS VSA takes precedence over the action configured by this command. For more information, see JunosE Broadband Access Configuration Guide.

    Mode

    Interface Configuration, Profile Configuration

    Published: 2014-08-14