Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    interface atm

    Syntax

    [ no ] interface atm interfaceSpecifier [ multipoint | point-to-point ]

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Configures an ATM interface or subinterface type. The no version removes the interface or subinterface.

    Note: On the OC3-2 GE APS I/O module, you can configure only OC3/STM1 ATM interfaces in ports 0 and 1. Port 2 is reserved for a Gigabit Ethernet interface.

    Options

    • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
    • multipoint—Specifies an NBMA subinterface
    • point-to-point—Specifies an ATM interface or subinterface; default

    Mode

    Global Configuration, Interface Configuration

    Published: 2014-08-20