Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All



    instance-interface-type {instanceInterfaceType | set | superset }

    no instance-interface-type { instanceInterfaceType | all }

    Release Information

    Command introduced in JunosE Release 7.1.0.
    lag keyword added in JunosE Release 8.1.0.

    set and superset keywords added in JunosE Release 9.2.0.


    Assigns an instance-interface type to a QoS parameter definition. Instance-interface types indicate the interfaces for which QoS clients can assign QoS parameter instances. You can specify up to eight instance-interface types for each parameter definition. The no version removes the specified instance-interface type from the parameter definition.


    • instanceInterfaceType—One of the following instance-interface types: atm, atm-vc, atm-vp, bridge, ethernet, fr-vc, ip, ip-tunnel, ipv6, lag, l2tp-session, l2tp-tunnel, lsp, pppoe, serial, server-port, svlan, vlan
    • set—Specifies an interface set as an instance-interface type
    • superset—Specifies an interface superset as an instance-interface type
    • all—Removes all instance-interface types


    QoS Parameter Definition

    Published: 2014-08-14