Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    hello hold-time

    Syntax

    hello hold-time seconds

    no hello hold-time

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Configures the MPLS hold time, the period that a sending LSR maintains a record of link hello messages from the receiving LSR without receipt of another link hello from that LSR. Each LSR peer sends the hold time in its link hello messages; peers negotiate to use the minimum of the hold times proposed by all LSRs on the same subnet. The hold timer is restarted whenever the LSR receives a link hello from the adjacent peer. The timer expires if no link hello is received from the adjacent peer within the hold time. The LSR deletes the link hello adjacency when the timer expires. If all link hello adjacencies are deleted for an LDP session, then the LSR terminates the LDP session. The no version restores the default value, 15 seconds.

    Options

    • seconds—Number of seconds, in the range 1–65535

    Mode

    LDP Profile Configuration

    Published: 2014-08-14