Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
frame-relay lmi-t391dte
Syntax
frame-relay lmi-t391dte seconds
no frame-relay lmi-t391dte
Release Information
Command introduced before JunosE Release 7.1.0.
Description
Sets the link integrity verification polling timer (T391) on a DTE interface. The no version removes the current setting and sets the default.
Options
- seconds—Number in the range 5–30 seconds; specifies the interval in seconds between status inquiries issued by the DTE; default value is 10 seconds
Mode
Interface Configuration