Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
frame-relay lmi-n393dce
Syntax
frame-relay lmi-n393dce events
no frame-relay lmi-n393dce
Release Information
Command introduced before JunosE Release 7.1.0.
Description
Sets the monitored events count (N393) on a DCE interface. The no version removes current setting and sets the default.
Options
- events—Number in the range 1–10 events; specifies the diagnostic window used to verify link integrity; default value is 2 events (The detection of N392 errors within the window of N393 samples places the interface in an operationally down state.)
Mode
Interface Configuration