Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
fpga-stats-monitoring-enable
Syntax
[no] fpga-stats-monitoring-enable
Release Information
Command introduced in JunosE Release 13.2.0.
Description
Enables the router to perform various actions (such as subscriber termination) when parity error is detected in the FPGA user and policy accounting statistics by the parity error check mechanism introduced in the FPGA. The no version disables the router from performing various actions after parity error detection, which is the default behavior.
 | Note: This command does not enable or disable the parity error check mechanism. The mechanism always checks for the parity error during various scenarios (such as policy attachment). This command is not displayed in the output of the show configuration command. |
Mode
Privileged Exec
