Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     
     

    forward

    Syntax

    [ no ] [ suspend ] forward
    [ interface interfaceType interfaceSpecifier [ next-hop nextHop
    [ ignore-default-route ] ]
    [ order orderValue ] ] | [ next-hop nextHop [ virtual-router vrName ]
    [ ignore-default-route ] [ order orderValue ] ] |
    [ order orderValue ] | classifier-group claclName ] [ precedence precValue ]

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Defines a rule to forward all packets that match the specified classifier control list. If you do not specify a classifier control list using the classifier-group keyword, the router will select all packets from the interface in the direction of the attached policy list. The no version removes the rule from the policy list; the suspend version temporarily suspends the forward rule; the no suspend version resumes application of a suspended rule.

    See the forward interface and forward next-hop commands for descriptions of the Classifier Group Configuration mode versions of this command.

    Options

    • interfaceType—Interface type; see Interface Types and Specifiers (IP policy lists only)
    • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers (IP policy lists only)
    • nextHop—Next-hop IP address (IPv4 and IPv6 policy lists)
    • ignore-default-route—Ignores the default route as a consideration for the next hop (IPv4 and IPv6 policy lists)
    • vrName—Name of the virtual router (IPv4 and IPv6 policy lists)
    • orderValue—Order of this forward rule within the single classifier; in the range 1–32767; default value is 100 (IPv4 and IPv6 policy lists)
    • claclName—Classifier control list used to classify packets for this policy
    • precValue—Precedence of this rule in relation to other rules within this set: in the range 0–32768; default value is 100

    Mode

    Policy List Configuration

     
     

    Published: 2014-08-14