Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
flash-disk initialize
Syntax
flash-disk initialize [ no-format ] [ disk0 | disk1 ]
Release Information
Command introduced before JunosE Release
7.1.0.
disk0 and disk1 keywords added in JunosE Release 7.2.0.
Privileged Exec mode added in JunosE Release 8.0.0.
Description
Performs a low-level format of unmounted flash cards. There is no no version.
Options
- no-format—Erases all files but does not format the flash card
- disk0—Specifies flash card in slot 0 of the SRP module; default value is disk0; available only in Boot mode, because disk0 cannot be in an unmounted state in a router outside of Boot mode
- disk1—Specifies flash card in slot 1 of the SRP module; supported only on the E120 router and the E320 router
Mode
Boot, Privileged Exec