Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All



    failover-resync { failover-protocol | failover-protocol-fallback-to-silent-failover |
    silent-failover | disable | not-configured }

    no failover-resync

    Release Information

    Command introduced in JunosE Release 7.3.0.


    Configures the L2TP peer resynchronization method that an L2TP failed endpoint uses to resynchronize with its peer non-failed endpoint. This command configures peer resynchronization for a host profile or a domain map tunnel, and overrides a global peer resynchronization method that is specified in Global Configuration mode. The no version restores the default setting, not-configured.


    • failover-protocol—Specifies the L2TP failover protocol method
    • failover-protocol-fallback-to-silent-failover—Specifies the L2TP failover protocol method; however, if the peer does not support this method, the silent failover method is used
    • silent-failover—Specifies the silent failover method
    • disable—Disables peer resynchronization
    • not-configured—Specifies that peer resynchronization is not configured for L2TP host profiles and AAA domain map tunnels. L2TP uses the global failover method; the default setting


    Domain Map Tunnel Configuration, L2TP Destination Profile Host Configuration

    Published: 2014-08-20