Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    enable secret

    Syntax

    enable secret [ level securityLevel ] [ secretType ] secretText

    no enable secret [ securityLevel ]

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Sets a secret to control access to certain types of commands. The first time you define a secret, you must enter it in plain text. To view its encrypted form, use the show config display. To redefine the secret at a later date, you can enter the secret in its encrypted form. The no version removes the secret requirement.

    Note: On the E Series router, all secrets are stored as encrypted secrets.

    Options

    • securityLevel—Security level for which you want to set the secret; default value is 5
      • 0—Allows the user to execute the help, enable, disable, and exit commands
      • 1—Allows the user to execute commands in User Exec mode plus commands at level 0
      • 5—Allows the user to execute Privileged Exec show commands plus the commands at levels 1 and 0; this is the default level
      • 10—Allows the user to execute all commands except support commands, which may be provided by Juniper Networks Customer Service
      • 15—Allows the user to execute support commands
    • secretType—One of the following:
      • 0—Indicates that the secret is unencrypted; this is the default
      • 7—Indicates that the secret is encrypted
    • secretText—Secret, either encrypted or unencrypted, depending on the secret type

    Mode

    Global Configuration

    Published: 2014-08-14