Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    debug ipv6 pim

    Syntax

    debug ipv6 pim
    { pimLog [ severity { severityValue | severityNumber } ] [ verbosity verbosityLevel ] |
    switchState groupAddress sourceAddress |
    dense-mode { on | off } |
    sparse-mode { on | off | sg-state [ group groupAddress
    [ source sourceAddress ] | rp rpAddress ] [ count ] } }

    no debug ipv6 pim pimLog

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Shows information about the selected variable. The no version disables the display.

    Options

    • pimLog—PIM log of interest; one of the following options:
      • autoRp-rcvd—Auto-RP packets received
      • autoRP-sent—Auto-RP packets sent
      • engineering—PIM engineering
      • hellos-rcvd—PIM hello messages received
      • hellos-sent—PIM hello messages sent
      • packets—PIM packets received and sent
      • packets-rcvd—PIM packets received
      • packets-sent—PIM packets sent
    • severity—Specifies the minimum severity of the log messages displayed for the selected category; described either by a descriptive term—severityValue—or by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the priority:
      • emergency or 0—System unusable
      • alert or 1—Immediate action needed
      • critical or 2—Critical condition exists
      • error or 3—Error condition
      • warning or 4—Warning condition
      • notice or 5—Normal but significant condition
      • info or 6—Informational message
      • debug or 7—Debug message
    • verbosityLevel—Verbosity of the log category's messages; can be any of the following:
      • low—Terse
      • medium—Moderate detail
      • high—Verbose
    • switchState—Switches from one type of tree to another
      • rpt-switch—Switch from a shortest-path tree to a shared path tree
      • spt-switch—Switch from a shared-path tree to a shortest path tree
    • groupAddress—IPv6 address of the multicast group
    • sourceAddress—IPv6 address of the multicast source
    • on—Turns on the specified PIM mode on all virtual routers
    • off—Turns off the specified PIM mode on all virtual routers
    • sg-state—Displays information about the relationship between a source, multicast group, and RP router
    • rp—Displays information about the relationships between sources, groups, and the specified RP router
    • rpAddress—Address of the RP router
    • count—Displays one of the following
      • (with no optional keywords) number of relationships between a source, multicast group, and RP router
      • (with the group keyword) number of sources associated with the multicast group for PIM sparse mode
      • (with the source and group keywords) number of source-group pairs for PIM sparse mode
      • (with the rp keyword) number of source-group pairs associated with the RP router for PIM sparse mode

    Mode

    Privileged Exec

    Published: 2014-08-14