Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    debug ip rip


    debug ip rip ripLog [ severity { severityValue | severityNumber } ]
    [ verbosity verbosityLevel ]

    no debug ip rip ripLog

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Shows information about the selected variable. The no version disables the display.


    • ripLog—RIP log of interest; one of the following options:
      • events—General RIP events, such as removing RIP from an interface or creating the RIP process
      • route—Events associated with two RIP routers exchanging routes
    • severity—Specifies the minimum severity of the log messages displayed for the selected category; described either by a descriptive term—severityValue—or by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the priority:
      • emergency or 0—System unusable
      • alert or 1—Immediate action needed
      • critical or 2—Critical condition exists
      • error or 3—Error condition
      • warning or 4—Warning condition
      • notice or 5—Normal but significant condition
      • info or 6—Informational message
      • debug or 7—Debug message
    • verbosityLevel—Verbosity of the log category's messages; can be any of the following:
      • low—Terse
      • medium—Moderate detail
      • high—Verbose


    Privileged Exec


    Published: 2014-08-14