Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    debounce-interval

    Syntax

    debounce-interval seconds

    no debounce-interval

    Release Information

    Command introduced in JunosE Release 9.3.0.

    Description

    Modifies the minimum time an Ethernet interface must maintain a given state—for example, up or down—before the interface notifies the upper-layer protocols of the state change. The no version restores the default value, 1 second.

    Note: You can configure this command only if you have enabled the debounce timer feature using the debounce command.

    Options

    • seconds—Interval for which an interface must maintain a given state before the interface reports the state change to the upper-layer protocols. Number in the range 1–5 seconds; default value is 1 second.

    Mode

    Interface Configuration

    Published: 2014-08-14