Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All



    controlled-interface-type { controlledInterfaceType | set | superset }

    no controlled-interface-type { controlledInterfaceType | all }

    Release Information

    Command introduced in JunosE Release 7.1.0.

    set and superset keywords added in JunosE Release 9.2.0.


    Assigns controlled-interface types to a QoS parameter definition. Controlled-interface types specify the types of logical interfaces whose queues and nodes can be controlled by instances of the parameter definition. You can specify up to four controlled-interface types for each parameter definition. The no version removes the controlled-interface type from the parameter definition.


    • controlledInterfaceType—One of the following controlled-interface types: atm, atm-vc, atm-vp, bridge, ethernet, fr-vc, ip, ip-tunnel, ipv6, l2tp-session, l2tp-tunnel, lsp, serial, svlan, server-port, vlan
    • set—Specifies an interface set as a controlled-interface type
    • superset—Specifies an interface superset as a controlled-interface type
    • all—Removes all controlled-interface types


    QoS Parameter Definition

    Published: 2014-08-14