Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    clock source


    clock source { line | internal { module | chassis } }

    no clock source

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Determines how an interfaces obtains clocking signals. The no version restores the default value, line.


    • line—Interface clocks data from a clock recovered from the line's receive data stream; the default.
    • internal—Internal clock source transmits data from its internal clock. You must specify one of the following for internal clocking:
      • module—Internal clock is from the line module itself
      • chassis—Internal clock is from the configured system clock


    Controller Configuration, Interface Configuration (POS only)

    Published: 2014-08-14