Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    clear suspicious-control-flow-detection

    Syntax

    clear suspicious-control-flow-detection
    [ interface interfaceSpecifier protocol protocolValue address ethernetAddress slot slotNumber ]

    Release Information

    Command introduced in JunosE Release 7.3.0.

    Description

    Clears one or more suspicious flows. If you do not specify a slot, interface, or IP address, clears all suspicious flows. If you specify a slot, clears all specified suspicious flows on that slot. If you specify an interface and protocol, clears flows that are identified down to the Ethernet mac address level. There is no no version.

    Options

    • protocolValue—Name of the protocol. For details about the values that are displayed for this attribute in the CLI interface, see the Protocol Mapping section in Understanding DoS Protection. The following names of protocols apply to the protocolValue variable that is available with this command, in addition to the list of protocol names that are described in the Protocol Mapping section.
      • EthernetFcBasedPppTerminate—Ethernet forwarding controller-based PPP Fast Reconnect
      • EthernetOam—Ethernet OAM packet
      • IpFastBfd—IP fast BFD
      • IpLocalFastBfd—IP local fast BFD
      • IpRouteNull0Interface—IP route to null 0 interface
    • ethernetAddress—Ethernet address to be cleared.
    • slotNumber—Number of the slot to be cleared.

    Mode

    Privileged Exec, User Exec

    Published: 2014-08-14