Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation


    authentication mode


    authentication mode { text | md5 keyID }

    no authentication mode

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Specifies the type of authentication used on the RIP remote-neighbor interface. Authentication is disabled by default. The no version removes authentication from the interface. Supported only in RIP version 2.


    • text—Sends a simple text password with each RIP message; if the password is not possessed by remote neighbors, the message is rejected
    • md5—Encrypts and compresses the RIP message with MD5 message-digest algorithms
    • keyID—Number identifying the MD5 key in the range 1–255; remote neighbors must share the MD5 key to decrypt the message and encrypt the response


    Remote Neighbor Configuration


    Related Documentation


    Published: 2014-08-14