Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    atm framing

    Syntax

    atm framing framingType

    no atm framing

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Configures T3 or E3 framing on an ATM interface. The no version returns framing to the default. For a T3 interface, the default value is cbitplcp. For an E3 interface, the default value is g751plcp.

    Options

    • framingType—One of the following:
      • cbitadm—c-bit with ATM direct mapping for a DS3 (T3) interface
      • cbitplcp—c-bit with PLCP framing for a DS3 (T3) interface (default for T3)
      • g832adm—G.832 ATM direct mapping for an E3 interface
      • g751adm—G.751 ATM direct mapping for an E3 interface
      • g751plcp—G.751 PLCP mapping for an E3 interface (default for E3)
      • m23adm—M23 ATM direct mapping for a DS3 (T3) interface
      • m23plcp—M23 with PLCP framing for a DS3 (T3)

    Mode

    Interface Configuration

    Published: 2014-08-14