Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    atm cell-packing

    Syntax

    atm cell-packing maxCellsPerPacket mcpt-timer timerIdentifier

    no atm cell-packing

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Configures cell concatenation parameters for an ATM 1483 subinterface that provides ATM layer 2 services over MPLS with virtual channel connection (VCC) cell relay encapsulation. The no version restores the default cell concatenation parameters for the subinterface.

    Note: See the atm mcpt-timers command for information about configuring systemwide values for the three ATM Martini cell packing timers to define the cell collection time threshold.

    Options

    • maxCellsPerPacket—Maximum number of ATM cells in the range 1–190 that the router can concatenate in a single VCC cell relay–encapsulated packet and transmit on an MPLS pseudowire connection; default value is 1 cell per packet
    • timerIdentifier—Integer in the range 1–3 that identifies which of the three ATM Martini cell packing timers (timer 1, timer 2, or timer 3) you want to use to detect timeout of the cell collection time threshold; default value is 1. When the timer expires, the router forwards the packet even if the number of concatenated ATM cells in the packet is fewer than the specified maximum number of cells per packet.

    Mode

    Subinterface Configuration

    Published: 2014-08-14