Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     
     

    address retransmit-interval

    Syntax

    [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } retransmit-interval retransInterval

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Specifies the time between LSA retransmissions for the interface when an acknowledgment for the LSA is not received. The no version restores the default value.

    Note: You must issue the address area command before issuing this command.

    Options

    • ipAddress—OSPF interface address previously specified with the address command
    • unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
    • retransInterval—Number in the range 0–3600 seconds; default value is 5 seconds

    Mode

    Router Configuration

     
     

    Published: 2014-08-14