Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
address priority
Syntax
[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier }
priority intfPriority
Release Information
Command introduced before JunosE Release 7.1.0.
Description
Sets the router priority. Used in determining the designated router for the particular network. This designation only applies to multi-access networks. Every broadcast and nonbroadcast multiaccess network has a designated router. The no version restores the default value.
 | Note: You must issue the address area command before issuing this command. |
Options
- ipAddress—OSPF interface address previously specified with the address command
- unnumbered—Indicates that OSPF is running on an
unnumbered interface previously specified with the address command
- interfaceType—Interface type; see Interface Types and Specifiers
- interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
- intfPriority—Priority value, an 8-bit number in the range 1–255; default value is 1
Mode
Router Configuration
