Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    address hello-interval


    [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier }
    hello-interval helloInterval

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Specifies the interval between hello packets that the router sends on the interface. The no version resets the hello interval to its default.

    Note: You must issue the address area command before issuing this command.


    • ipAddress—OSPF interface address previously specified with the address command
    • unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
    • helloInterval—Number in the range 1–65535 seconds; default value is 10 seconds


    Router Configuration


    Published: 2014-08-14