Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     
     

    address dead-interval

    Syntax

    [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier }
    dead-interval deadInterval

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Sets the time period that the router's neighbors should wait without seeing hello packets from the router before they declare the router to be down. The no version resets the dead interval to its default.

    Note: You must issue the address area command before issuing this command.

    Options

    • ipAddress—OSPF interface address previously specified with the address command
    • unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
    • deadInterval—Number in the range 0–2147483647 seconds; default value is 40 seconds

    Mode

    Router Configuration

     
     

    Published: 2014-08-14