Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    adapter erase

    Syntax

    adapter erase adapterSpecifier

    Release Information

    Command introduced in JunosE Release 7.1.0.

    Description

    Erases from NVS the type and configuration of the previous IOA in the specified IOA bay, and allows you to configure a new IOA. Issue this command before you install a different type of IOA in an IOA bay. There is no no version.

    Note: Issuing this command reboots the line module associated with the IOA, but it does not erase its configuration.

    To erase the configuration of the line module and its associated IOAs, issue the slot erase command.

    Options

    • adapterSpecifier—Particular IOA in the format slot/adapter:
      • slot—Number of the chassis slot; for E120 routers, in the range 0–5; for E320 routers, in the range 0–5 or 11–16
      • adapter—Identifier for the IOA within the chassis slot, either 0 or 1, where:
        • 0 indicates that the IOA is installed in the right IOA bay (E120 router) or the upper IOA bay (E320 router).
        • 1 indicates that the IOA is installed in the left IOA bay (E120 router) or the lower IOA bay (E320 router).

    Mode

    Global Configuration

     

    Related Documentation

     

    Published: 2014-08-14