Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    QoS Downstream Rate Application Overview

    You can associate the QoS downstream rate (qos-downstream-rate) application with a parameter definition. The QoS downstream rate application enables you to shape the downstream rate of VLANs and ATM VCs based on parameter instances that are created dynamically by the Access Node Control Protocol (ANCP), also known as the layer 2 control (L2C) protocol, or the Actual-Data-Rate-Downstream [26-130] DSL Forum vendor-specific attribute (VSA). The values of the parameter instances track the bandwidth of the local loop that is communicated by ANCP or the [26-130] VSA.

    Downstream Rate and the Shaping Mode

    After you configure a parameter definition with the QoS downstream rate application, you can configure the shaping mode for the VLAN or ATM VC. For ATM VCs, use the qos-shaping-mode command.

    For VLANs, you can use the QoS cell mode application with QoS parameters to perform a cell mode adjustment. ANCP creates instances of the parameter based on the DSL type of the local loop associated with the VLAN.

    VLANs configured on the ES2 4G LM on the E120 and E320 Broadband Services routers use an internal cell-taxing mechanism to perform the cell mode adjustment. For VLANs configured on all other E Series Broadband Services Routers, you must also configure a parameter expression to configure the cell mode adjustment.

    QoS Adaptive Mode and Downstream Rate

    After you create the parameter definition, you must enable QoS adaptive mode for ANCP by issuing the qos-adaptive-mode command. ANCP uses this setting to dynamically create the parameter instances for the QoS downstream rate application and, if applicable, the QoS cell mode application. It also uses the setting to determine the value that the system uses when recalculating the shaping rate.

    For example, if you created a parameter definition with the QoS cell mode application, ANCP configures parameter instances associated with a value of 0 to indicate a frame-oriented DSL types such as VDSL2. ANCP configures cell-oriented DSL types such as ADSL with a value of 1.

    Table 1 lists the DSL types, interface type, and resultant shaping modes that ANCP configures when creating a parameter instance for the QoS cell mode application.

    Table 1: Access Loop Types and Resultant Shaping Mode

    Access Loop Type

    Access Loop Interface Type

    Shaping Mode



















    Obtaining Downstream Rates from a DSL Forum VSA

    You can configure the QoS downstream rate application to shape VLANs or ATM VCs based on downstream rates obtained from the Actual-Data-Rate-Downstream [26-130] DSL Forum vendor-specific attribute (VSA).

    Published: 2014-08-11