Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    PADN Messages Overview

    You can configure PPPoE to receive PPPoE Active Discovery Network (PADN) messages. When a client connects to a PPPoE server, such as an E Series router, the client receives configuration information from the server via the PADN message. This PADN information associates the PPPoE sessions with a set of routes. The client can use this set of routes to determine which session to use based on the destination IP address.

    The PADN packet data is relevant only when the PPP network layer is “ up.” To reach an up state, PPP alerts PPPoE after the Network Control Protocol (NCP) completes negotiation.

    The routes of interest can be maintained on the router in domain maps.

    Note: For information about domain mapping, see JunosE Broadband Access Configuration Guide.

    Published: 2014-08-14