Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    L2TP Overview

    L2TP encapsulates layer 2 packets, such as PPP, for transmission across a network. An L2TP access concentrator (LAC), configured on an access device, such as an E Series router, receives packets from a remote client and forwards them to an L2TP network server (LNS), on a remote network.

    You can configure your router to act as an LAC in pass-through mode in which the LAC receives packets from a remote client and then forwards them at layer 2 directly to the LNS.

    The E Series router creates tunnels dynamically by using authentication, authorization, and accounting (AAA) authentication parameters and transmits L2TP packets to the LNS via IP/User Datagram Protocol (UDP). Traffic travels in an L2TP session. A tunnel is an aggregation of one or more sessions. Figure 1 and Figure 2 show the E Series router in typical LAC and LNS arrangements.

    Figure 1: Using the E Series Router as an LAC

    Using the E Series Router as an
LAC

    .

    Figure 2: Using the E Series Router as an LNS

    Using the E Series Router as an
LNS

    Note: The E Series router does not support terminating both ends of a tunnel or session in the same router.

    Published: 2014-08-20