Enabling Interface-Level Admission Bandwidth Limitation for IPv6

You can use the ipv6 multicast admission-bandwidth-limit command to enable multicast admission control on interfaces (including dynamic IP interfaces) that are configured to run MLD. You can also use this command on a PIM (sparse-mode, dense-mode, or sparse-dense-mode) interface if MLD is configured on the interface (including the ipv6 mld version passive command).

To limit bandwidth for an interface that accepts MLD groups:

• Issue the ipv6 multicast admission-bandwidth-limit command in Interface Configuration mode.
  host1:boston(config-if)#ipv6 multicast admission-bandwidth-limit 2000000

Use the no version to remove the bandwidth limitation for the interface.

Related Documentation

• Blocking IPv6 Mroutes
• Interface-Level Admission Bandwidth Limits for IPv6 Overview
• OIF Interface Reevaluation for IPv6
• ipv6 multicast admission-bandwidth-limit