Configuring the Static VLAN Major Interface to Support Autodetection of a VLAN Dynamic Interface Type

You can use the auto-configure vlan command to configure the static VLAN major interface to support autodetection of an VLAN dynamic interface type. Issue this command to enable creation of a dynamic VLAN subinterface. By default, all valid VLAN IDs and S-VLAN IDs are accepted.

To configure the static VLAN major interface to support autodetection of an VLAN dynamic interface type:

host1(config-if)#auto-configure vlan

Use the no version to terminate autodetection of the VLAN dynamic interface type.

Related Documentation