Configuring the Static ATM AAL5 Interface to Support Autodetection of an ATM 1483 Dynamic Encapsulation Type

You can use the auto-configure atm1483 command to configure the static ATM AAL5 interface to enable all bulk configurations and support autodetection of an ATM 1483 dynamic encapsulation type. This command enables creation of a dynamic ATM 1483 subinterface.

To configure the static ATM AAL5 interface to enable all bulk configurations and support autodetection of an ATM 1483 dynamic encapsulation type:

host1(config-if)#auto-configure atm1483

Use the no version to terminate autodetection of the ATM 1483 encapsulation type.

Related Documentation