Monitoring the Characteristics of a Profile Assigned to Dynamic Interfaces

Purpose

Display information about profiles. You can use the name keyword to display information about a specific profile. You can use the brief keyword to display a list of profiles configured on the router.

Action

To display configuration information for a profile assigned to a dynamic interface:

host1#show profile name pppoe
PPP Keepalive               : 30
PPP Magic Number            : enabled
PPP Magic Number Mismatch   :reject 
PPP Peer DNS Priority       : disabled
PPP Peer WINS Priority      : disabled
PPP Authentication          : 
PPP Authentication Router   :
PPP Negotiate MRU           : (use lower layer MRU)
PPP Packet Log              : disabled
PPP State Log               : disabled
PPP Chap Challenge Length   : 16 - 32
PPP Passive Mode            : disabled
PPP Multilink               : disabled
PPP IPCP Netmask Option     : disabled
PPP IPCP Lockout Option     : disabled
PPP IPCP Lockout            : disabled
PPP AAA Profile             :
PPP Multilink Fragmentation : disabled
PPP Multilink Fragment Size : (use MTU)
PPP Multilink Reassembly    : disabled
PPP Multilink Mrru          : (use MRU)
PPP Hash Link Selection     : disabled
PPP Initiate IP             : disabled
PPP Initiate IPv6           : disabled
PPP Max-negotiations LCP    : 30
PPP Max-negotiations IPCP   : 30
PPP Max-negotiations IPv6CP : 30
PPP IPCP prompt-option DNS  : enabled
PPP Multilink Multiclass    : disabled
PPP Multilink Multiclasses  : 0
PPP Ipcp Max Negotiation    : 6
PPP Ipcp Negotiation time   : 60
PPP Ipcp Lockout time       : 600
PPP broadcast Accounting Group Name     : groupxyz
PPP Client Username          :
PPP Client Password         :
PPP Client Authentication   :
PPP Client Ip Address       : 0.0.0.0
PPP Client Primary Dns Address   : 0.0.0.0
PPP Client Secondary Dns Address   : 0.0.0.0
PPP Client Primary Wins Address   : 0.0.0.0
PPP Client Secondary Wins Address   : 0.0.0.0

To display configuration information for a base profile assigned to a dynamic ATM 1483 subinterface:

host1#show profile name atm1483BaseProfile
ATM1483 Auto-configure ip                 : disabled
ATM1483 Auto-configure bridgedEthernet    : disabled
ATM1483 Auto-configure ppp                : enabled
ATM1483 lockout (seconds) ppp             : range : 1-300
ATM1483 Auto-configure pppoe              : enabled
ATM1483 lockout (seconds) pppoe           : range : 1-300
ATM1483 PVC circuit type         :  aal5autoconfig
ATM1483 PVC service category     :  Nrt-Vbr
ATM1483 PVC Peak rate : 10000, Avg rate : 2000, Burst size : 500
ATM1483 Description              :  VC_atm1483 
ATM1483 Advisory Rx Speed        :  2000000000 

ATM1483 PVC OAM Administrative status: enabled
ATM1483 PVC OAM Loopback frequency:    30
ATM1483 Ip Subscriber information: 
  user             : elaine
  domain           : jpeterman.com
  password         : putty
ATM1483 IP Profile               : none assigned
ATM1483 Bridged Ethernet Profile : none assigned
ATM1483 PPP Profile              : none assigned
ATM1483 PPPoE Profile            : pppoeProfile

To display configuration information for a base profile assigned to a dynamic VLAN subinterface:

host1#show profile name vlanProfile 
VLAN Auto-configure ip             : enabled
VLAN Auto-configure pppoe          : enabled
VLAN Svlan Ethertype               : auto-configure
VLAN Advisory Rx Speed             : 100 Kbps
VLAN Advisory Tx Speed             : 2500 Kbps
VLAN Description                   : testing
VLAN IP Profile                    : ipProfile
VLAN PPPoE Profile                 : pppoeProfile
VLAN Service Profile               : none assigned 
Bridged Ethernet Mtu               : 1971 
Bridged Ethernet Service Profile   : eastServiceProfile 

To display profile configuration information related to IPv6 Neighbor Discovery router advertisements:

host1#show profile name ipv6Profile 
IPv6 Unnumbered interface  : loopback 0
IPv6 Router                : default
IPv6 Src-Addr Validation   : Disabled
IPv6 Administrative MTU    : 0
IPv6 ND Enabled            : Enabled
IPv6 ND ManagedConfig      : Disabled
IPv6 ND OtherConfig        : Enabled
IPv6 ND SuppressRa         : Disabled
IPv6 ND RaInterval         : 50
IPv6 ND RaLifeTime         : 1800
IPv6 ND ReachableTime      : 0
IPv6 ND RaPrefix           : 1234::/64
IPv6 ND ValidLifetime      : 60
IPv6 ND PreferredLifetime  : 60
IPv6 ND PrefixOnLink       : Enabled
IPv6 ND PrefixAutoConfig   : Enabled
IPv6 http redirect Url     : http://www.google.com

Meaning

Table 57 lists the show profile command output fields.

Table 67: show profile Output Fields

Field Name

Field Description

Profile

Name of the profile that is displayed

IP address

IP address and subnet mask of the interface, or none if the interface is unnumbered

Unnumbered interface

Specifier for the unnumbered interface, or none if the interface is numbered

Router

Name of the virtual router assigned to the profile; interfaces created by the profile are attached to this virtual router

Directed Broadcast

Enabled or disabled

ICMP Redirects

Enabled or disabled

Access Route Addition

Enabled or disabled

Network Address Translation

Enabled or disabled; domain location (inside or outside)

Source-Address Validation

Enabled or disabled

Ignore DF Bit

Enabled or disabled

Filter Option Packets

Router filters out packets with IP options; enabled or disabled

Administrative MTU

MTU size configured on the profile

TCP MSS value

Maximum segment size for TCP SYN packets traveling through the interface

Inactivity Timer

Inactivity timer setting; enabled or disabled

Route Map Name

Route map applied to the IP interface subscriber; enabled or disabled

Auto Detect

Router automatically detects packets that do not match any entries in the demultiplexer table; enabled or disabled

Auto Configure

Dynamic creation of subscriber interfaces on a primary IP interface; enabled or disabled

IGMP

Enabled or disabled

static-groups

Displays address of any static groups configured for IGMP

Input policy

Name of input policy and whether statistics are enabled or disabled

Output policy

Name of output policy and whether statistics are enabled or disabled

PPP Keepalive

PPP keepalive period, in seconds

PPP Magic Number

Enabled or disabled

PPP Magic Number Mismatch

Indicates whether the router is configured to ignore the LCP peer magic number and retain the PPP connection when the peer has not negotiated an LCP magic number: ignore (ignore the peer magic number mismatch and retain the PPP connection), or reject (router terminates the PPP connection if it detects a peer magic number mismatch)

PPP Peer DNS Priority

Enabled or disabled

PPP Peer WINS Priority

Enabled or disabled

PPP Authentication

Type of authentication configured: PAP, CHAP, or none

PPP Authentication Router

Name of authentication virtual router

PPP Negotiate MRU

MRU configured for the profile

PPP Packet Log

Enabled or disabled

PPP State Log

Enabled or disabled

PPP Chap Challenge Length

Minimum and maximum Chap Challenge length

PPP Passive Mode

Enabled or disabled

PPP Multilink

Enabled or disabled

PPP IPCP Netmask Option

Enabled or disabled

PPP IPCP Lockout Option

Enabled or disabled

PPP Max-negotiations IPCP

Maximum number of renegotiation attempts that the router accepts before terminating a PPP session

PPP AAA Profile

AAA profile associated with this PPP interface

PPP Multilink Fragmentation

Enabled or disabled

PPP Multilink Fragment Size

Multilink fragment size for this PPP interface

PPP Multilink Reassembly

Enabled or disabled

PPP Multilink Mrru

Multilink MRRU value for this PPP interface

PPP Hash Link Selection

Hash-based link selection for a PPP interface; enabled or disabled

PPP Initiate IP

Initiation of IPv4 over this PPP interface; enabled or disabled

PPP Initiate IPv6

Initiation of IPv6 over this PPP interface; enabled or disabled

PPP IPCP prompt-option dns

Prompts the CPE (Customer Premises Equipment) to negotiate the IPCP primary and secondary DNS options that are locally available with the broadband remote access server; enabled or disabled

PPP Multilink Multiclass

Configuration of multiclass MLPPP on the MLPPP interface: enabled or disabled

PPP Multilink Multiclasses

Number of multilink classes created on the MLPPP interface: 1 through 8

PPP Ipcp Max Negotiation

Maximum number of successful IPCP renegotiations for IPv4 addresses that the router can receive per subscriber: 3 through 6

PPP Ipcp Negotiation time

Time period during which IPCP renegotiations for IPv4 addresses that the router or the provider edge device can receive from a subscriber are restricted: 60 through 600 seconds

PPP Ipcp Lockout time

Time period during which additional IPCP negotiations are prevented: 300 through 600 seconds

PPP broadcast Accounting Group Name

Name of the broadcast virtual router group associated with this PPP profile

PPPoE Max Sessions

Maximum number of PPPoE subinterfaces that can be on an interface

PPPoE Always-offer

Router offers to set up a session for the client, even if the router has insufficient resources to establish a session; enabled or disabled

PPPoE Remote-Circuit-Id

The router captures and processes a vendor-specific tag containing a remote circuit ID transmitted from a digital subscriber line access multiplexer; enabled or disabled

PPPoE Log PPPoeControlPacket

Enabled or disabled

PPPOE duplicate-protect

Enabled or disabled

PPPoE ACNAME

Access concentrator name

PPPoE URL

URL sent in PADM message to PPPoE clients

PPPoE MOTM

Message of the minute sent in the PADM message to PPPoE clients

PPPoE Service-Name Table

Name of the PPPoE service name table, if configured for the specified profile

ATM1483 Auto-configure

Whether autodetection of the specified upper-interface encapsulation type (bridged Ethernet, IP, PPP, or PPPoE) is enabled or disabled for a dynamic ATM 1483 subinterface

ATM1483 lockout (seconds)

Encapsulation type lockout setting for the specified upper-interface encapsulation type (bridged Ethernet, IP, PPP, or PPPoE) configured on a dynamic ATM 1483 subinterface:

  • range—Minimum lockout time–maximum lockout time, in seconds
  • no lockout—Encapsulation type lockout is disabled

ATM1483 PVC circuit type

Encapsulation setting for the PVC configured on a dynamic ATM 1483 subinterface:

  • aal5autoconfig—Enables autodetection of the 1483 encapsulation (LLC/SNAP or VC multiplexed)
  • aal5mux ip—VC-based multiplexed circuit for IP only
  • aal5snap—LLC encapsulated circuit; the LLC/SNAP header precedes the protocol datagram

ATM1483 PVC service category

Service type setting for the PVC configured on a dynamic ATM 1483 subinterface: UBR (the default), UBR PCR, NRT-VBR, RT-VBR, or CBR

ATM1483 PVC Peak rate

Peak cell rate, in Kbps, for the PVC configured on a dynamic ATM 1483 subinterfaces

ATM1483 PVC Avg rate

Average rate, in Kbps, for the PVC configured on a dynamic ATM 1483 subinterface; also referred to as sustained cell rate

ATM1483 PVC Burst size

Length in cells of the burst for the PVC configured on a dynamic ATM 1483 subinterface; also referred to as maximum burst size

ATM1483 Description

Text description assigned to ATM 1483 subinterfaces that are created with this profile

ATM1483 Advisory Rx Speed

Configured receive speed, in Kbps, for the dynamic ATM 1483 subinterface. The E Series LAC sends this value to the LNS in the RX Connect-Speed AVP [38].

ATM1483 PVC OAM Administrative status

Status of OAM F5 loopback cell generation (for VC integrity) on a circuit created with this profile: enabled or disabled

ATM1483 PVC OAM Loopback frequency

Number of seconds between transmissions of OAM F5 end-to-end loopback cells on a circuit created with this profile

ATM1483 Ip Subscriber information

Subscriber login information for the specified dynamic interface type

ATM1483 Profile

Name of the profile assigned to the specified upper-interface encapsulation type (bridged Ethernet, IP, PPP, or PPPoE); these profiles are referenced in the base profile for a dynamic ATM 1483 subinterface as nested profile assignments

VLAN Auto-configure

Whether auto detection of the specified upper-interface encapsulation type (IP or PPPoE) is enabled or disabled for a dynamic VLAN subinterface

VLAN Advisory Rx Speed

Configured advisory receive speed, in Kbps, for the dynamic VLAN subinterface; the E Series LAC sends this value to the LNS in the RX Connect-Speed AVP [38]

VLAN Advisory Tx Speed

Configured advisory speed, in Kbps, for the dynamic VLAN subinterface.

VLAN Description

Text description assigned to VLAN subinterfaces that are created with this profile

VLAN Profile

Name of the profile assigned to the specified upper-interface encapsulation type (IP or PPPoE); these profiles are referenced in the base profile for a dynamic VLAN subinterface as nested profile assignments

VLAN Service Profile

Service profile name for a VLAN

VLAN Svlan Ethertype

Ethertype that the packet must use this to create the dynamic VLAN subinterface

Bridged Ethernet Mtu

MTU size configured for a dynamic bridged Ethernet interface

Bridged Ethernet Service Profile

Name of the IP service profile associated with the interface profile for this dynamic bridged Ethernet interface

IPv6 http redirect Url

URL to which a subscriber’s initial web browser session is redirected

IPv6 Unnumbered interface

Name of interface without a specific address

IPv6 Router

Router name or default

IPv6 Src-Addr Validation

Source-Address Validation; enabled or disabled

IPv6 Administrative MTU

MTU size

IPv6 ND Enabled

State of the Neighbor Discovery; enabled or disabled

IPv6 ND ManagedConfig

State of the Neighbor Discovery router advertisement managed flag; enabled or disabled

IPv6 ND OtherConfig

State of the Neighbor Discovery router advertisement other config flag; enabled or disabled

IPv6 ND SuppressRa

Status IPv6 router advertisement suppression; enabled or disabled

IPv6 ND RaInterval

Interval (in seconds) of the Neighbor Discovery router advertisement

IPv6 ND RaLifeTime

Lifetime (in seconds) of the Neighbor Discovery router advertisement

IPv6 ND ReachableTime

Amount of time (in milliseconds) that the neighbor is expected to remain reachable

IPv6 ND RaPrefix

Configured prefixes for Neighbor Discovery router advertisement

IPv6 ND ValidLifetime

Amount of time (in seconds) that the router advertises the IPv6 prefix as valid

IPv6 ND PreferredLifetime

Amount of time (in seconds) that the router advertises the specified IPv6 prefix as preferred

IPv6 ND PrefixOnLink

State of the on-link flag; enabled or disabled

IPv6 ND PrefixAutoConfig

State of the use the specified prefix for IPv6 autoconfiguration; enabled or disabled

Related Documentation