Monitoring Detailed Information About the Current Encapsulation Type Lockout Condition for PPPoE Clients

Purpose

Display detailed information about the current encapsulation type lockout condition for each PPPoE client associated with a dynamic PPPoE subinterface column on a static PPPoE major interface.

Action

To display detailed information about the current encapsulation type lockout condition for each PPPoE client associated with a dynamic PPPoE subinterface column on a static PPPoE major interface:

host1#show pppoe interface atm 12/1/1.1.1 lockout-time
PPPoE interface atm 12/1/1.1
Lockout Configuration (seconds): Min 90, Max 120
 Total clients in active lockout: 1
 Total clients in lockout grace period: 0
Client Address Current Elapsed Next
-------------- ------- ------- ----
0090.1a42.527c     120      30  120
0090.1a42.527c       0       0   90

Meaning

Table 55 lists the show pppoe interface lockout-time command output fields.

Table 65: show pppoe interface lockout-time Output Fields

Field Name

Field Description

PPPoE interface

Specifier for the PPPoE interface

Lockout Configuration (seconds)

Encapsulation type lockout settings for the PPPoE client associated with the dynamic PPPoE subinterface column:

  • Min—Minimum lockout time, in seconds
  • Max—Maximum lockout time, in seconds
  • Total clients in active lockouts—Number of PPPoE clients currently undergoing dynamic encapsulation type lockout
  • Total clients in lockout grace period—Number of PPPoE clients currently in a lockout grace period; for more information about the lockout grace period, see Guidelines for Configuring Encapsulation Type Lockout for PPPoE Sessions

Client Address

Source MAC address of the PPPoE client

Note: Because PPPoE sessions that contain the IWF-Session DSL Forum VSA (26-154) use the same source MAC address of the DSLAM for all subscriber connections, multiple entries are displayed in the Client Address field for the same MAC address if multiple IWF sessions contain the same MAC address.

Current

Current lockout time, in seconds; displays 0 (zero) if the PPPoE client is not undergoing lockout

Elapsed

Time elapsed into the lockout time, in seconds; displays 0 (zero) if the PPPoE client is not undergoing lockout

Next

Lockout time that the router uses for the next lockout event, in seconds

Related Documentation