Monitoring the PPPoE Profile

Purpose

Display information about the profiles configured on the router and detailed information on a specific profile associated with PPPoE interface.

Note: Use the name keyword to display information about a specific profile. Use the brief keyword to display a list of profiles configured on the router.

Action

To display configuration information for a PPPoE profile assigned to a dynamic interface:

host1#show profile name pppoeProfile
Profile                    : pppoeProfile
Unnumbered interface on    : loopback 1
Router                     : default
Directed Broadcast         : Disabled
ICMP Redirects             : Disabled
Access Route Addition      : Enabled
Network Address Translation: Disabled 
Source-Address Validation  : Disabled
Ignore DF Bit              : Disabled
Filter Option Packets      : Disabled
Administrative MTU         : 1500
TCP MSS value              : 0
Inactivity Timer           : Disabled
Route Map Name             : Disabled
Auto Detect                : Disabled
Auto Configure             : Disabled
Append VR Name with DSI    : Enabled
IGMP                       : Enabled
  static-groups            :
  Input policy:  bobb statistics enabled
  Output policy: bobb statistics enabled
PPP Keepalive               : 30
PPP Magic Number            : enabled
PPP Peer DNS Priority       : disabled
PPP Peer WINS Priority      : disabled
PPP Authentication          : pap/chap
PPP Authentication Router   :
PPP Negotiate MRU           : (use lower layer MRU)
PPP Packet Log              : disabled
PPP State Log               : disabled
PPP Chap Challenge Length   : 16 - 32
PPP Passive Mode            : disabled
PPP Multilink               : disabled
PPP IPCP Netmask Option     : disabled
PPP AAA Profile             :
PPP Multilink Fragmentation : disabled
PPP Multilink Fragment Size : (use MTU)
PPP Multilink Reassembly    : disabled
PPP Multilink Mrru          : (use MRU)
PPP Initiate IP                    : disabled
PPP Initiate IPv6                  : disabled
PPPoE Max Sessions          : 2
PPPoE Always-offer          : Disabled
PPPoE Remote-Circuit-Id     : Enabled 
PPPoE Log PPPoeControlPacket: Disabled
PPPoE duplicate-protect     : Enabled
PPPoE ACNAME                : CYM9876
PPPoE URL                   : http://www.urlofinterest.com
PPPoE MOTM                  : goodmorning
PPPoE Service-Name table    : myServiceTable1 

Meaning

Table 43 lists the show profile command output fields.

Table 43: show profile Output Fields

Field Name

Field Description

Profile

Name of the profile

IP address

IP address and subnet mask of the interface, or none if the interface is unnumbered

Unnumbered interface

Specifier for the unnumbered interface, or none if the interface is numbered

Router

Name of the virtual router (VR) assigned to the profile; interfaces created by the profile are attached to this VR.

Directed Broadcast

Whether the router supports directed broadcast. Possible values: enabled or disabled

ICMP Redirects

Whether the router accepts ICMP redirects. Possible values: enabled or disabled

Access Route Addition

Whether the router enables access route additions. Possible values: enabled or disabled.

Network Address Translation

Whether the router supports network address translation. Possible values: enabled or disabled; domain location (inside or outside)

Source-Address Validation

Router validates the source address associated with the profile. Possible values: enabled or disabled.

Ignore DF Bit

Router ignores the DF bit. Possible values: enabled or disabled.

Filter Option Packets

Router filters out packets with IP options. Possible values: enabled or disabled.

Administrative MTU

MTU size configured on the profile

TCP MSS value

Maximum segment size for TCP SYN packets traveling through the interface

Inactivity Timer

Inactivity timer setting. Possible values: enabled or disabled.

Route Map Name

Route map applied to the IP interface subscriber. Possible values: enabled or disabled.

Auto Detect

Router automatically detects packets that do not match any entries in the demultiplexer table. Possible values: enabled or disabled.

Auto Configure

Dynamic creation of subscriber interfaces on a primary IP interface. Possible values: enabled or disabled.

IGMP

Whether the router supports IGMP. Possible values: enabled or disabled.

static-groups

Displays address of any static groups configured for IGMP

Input policy

Name of input policy and whether statistics are enabled or disabled

Output policy

Name of output policy and whether statistics are enabled or disabled.

PPP Keepalive

Keepalive duration, in seconds

PPP Magic Number

Determines if the PPP magic number was negotiated. Possible values: enabled or disabled.

PPP Peer DNS Priority

Determines the DNS address that prevails in the event of a negotiation conflict. Possible values: enabled or disabled.

PPP Peer WINS Priority

Determines the WINS address that prevails in the event of a negotiation conflict. Possible values: enabled or disabled.

PPP Authentication

Type of authentication configured. Possible values: PAP, CHAP, or none.

PPP Authentication Router

Name of authentication virtual router.

PPP Negotiate MRU

MRU configured for the profile.

PPP Packet Log

Whether the packet trace log for PPP is configured. Possible values: enabled or disabled.

PPP State Log

Whether the state trace log for PPP is configured. Possible values: enabled or disabled.

PPP Chap Challenge Length

Minimum and maximum value of the Chap authenticator challenge length value.

PPP Passive Mode

Forces the PPP link into passive mode. Possible values: enabled or disabled.

PPP Multilink

Whether the router supports multilink. Possible values: enabled or disabled.

PPP IPCP netmask option

Whether the router supports negotiation of the IPCP option netmask during IPCP negotiation. Possible values: enabled or disabled.

PPP AAA Profile

AAA profile associated with this PPP interface

PPP Multilink Fragmentation

Whether the router supports fragmentation of the PPP multilink. Possible values: enabled or disabled.

PPP Multilink Fragment Size

Multilink fragment size for this PPP interface.

PPP Multilink Reassembly

Whether the router supports reassembly of the PPP multilink. Possible values: enabled or disabled.

PPP Multilink Mrru

Multilink MRRU value for this PPP interface

PPP Initiate IP

Initiation of IPv4 over this PPP interface. Possible values: enabled or disabled.

PPP Initiate IPv6

Initiation of IPv6 over this PPP interface. Possible values: enabled or disabled.

PPPoE Max Sessions

Maximum number of PPPoE subinterfaces that can be configured on an interface

PPPoE Always-offer

Router offers to set up a session for the client, even if the router has insufficient resources to establish a session. Possible values: enabled or disabled.

PPPoE Remote-Circuit-Id

The router captures and processes a vendor-specific tag containing a remote circuit ID transmitted from a digital subscriber line access multiplexer (DSLAM). Possible values: enabled or disabled.

PPPoE Log PPPoeControlPacket

Whether the packet trace log for the PPPoE interface is configured. Possible values: enabled or disabled.

PPPoE duplicate-protect

Whether the router can prevent a client from establishing more than one session using the same MAC address. Possible values: enabled or disabled.

PPPoE ACNAME

Name of the PPPoE access concentrator

PPPoE URL

URL sent in PADM message to PPPoE clients

PPPoE MOTM

Message of the minute sent in the PADM message to PPPoE clients

PPPoE Service-Name Table

Name of the PPPoE service name table, if configured for the specified profile.

Related Documentation