Enabling Usage of PPPoE Service Name Tables with Static Interfaces over ATM

To enable a PPPoE service name table for use with a static interface, assign the service name table to the PPPoE major interface.

To enable a PPPoE service name table for use with a static interface in PPPoE over ATM configurations:

  1. Configure an ATM physical interface.
    host1(config)#interface atm 3/0
  2. Configure an ATM 1483 subinterface.
    host1(config-if)#interface atm 3/0.1
  3. Configure an ATM PVC by specifying the VCD, the VPI, the VCI, and the encapsulation type.
    host1(config-subif)#atm pvc 10 100 22 aal5snap
  4. Select PPPoE as the encapsulation method on the interface. This command creates the PPPoE major interface.
    host1(config-subif)#encapsulation pppoe
  5. Assign the PPPoE service name table to the PPPoE major interface.
    host1(config-subif)#pppoe service-name-table myServiceTable1

Related Documentation