Monitoring an IP Profile

Purpose

Display information about a specific IP profile.

Action

To display information about a specific IP profile:

host1#show ip profile foo
IP profile : foo
IP address                 : none
Unnumbered interface       : none
Router                     :
Directed Broadcast         : Enabled
ICMP Redirects             : Disabled
Access Route Addition      : Enabled
Network Address Translation: Enabled, domain inside
Source-Address Validation  : Enabled
Ignore DF Bit              : Disabled
Administrative MTU         : 0 
Auto Detect                : Disabled
Auto Configure             : Disabled
Auto Detect                : Disabled
IP FlowStats               : Enabled

Meaning

Table 33 lists the show ip profile command output fields.

Table 33: show ip profile Output Fields

Field Name	Field Description
IP profile	Profile name
IP address	IP address and subnet mask of the interface or none if the interface is unnumbered
Unnumbered interface	Specifier for the unnumbered interface or none if the interface is numbered
Router	Router name
Directed Broadcast	Directed broadcast forwarding feature status: Enabled or disabled
ICMP Redirects	ICMP redirect feature status: Enabled or disabled
Access Route Addition	Access route feature status: Enabled or disabled
Network Address Translation	Enable or disable; domain location (inside or outside)
Source-Address Validation	Source address validation feature status: Enabled or disabled
Ignore DF Bit	Ignoring DF bit usage: Enabled or disabled
Administrative MTU	MTU size
Auto Detect	Router automatically detects packets that do not match any entries in the demultiplexer table; enabled or disabled
Auto Configure	Dynamic creation of subscriber interfaces on a primary IP interface; enabled or disabled
IP FlowStats	Enabled or disabled

Monitoring an IP Profile

Purpose

Action

Meaning

Related Documentation