Commands Used to Monitor IPv6

You can monitor the following aspects of IPv6 using show ipv6 commands:

To Display


General IPv6 information

show ipv6

IPv6 addresses

show ipv6 address

IPv6 forwarding table

show ipv6 forwarding-table slot

IPv6 Interfaces

show ipv6 interface

IPv6 neighbors

show ipv6 neighbors

IPv6 profile information

show ipv6 profile

Active IPv6 protocol information

show ipv6 protocols

IPv6 route redistribution configuration

show ipv6 redistribute

IPv6 routes

show ipv6 route

IPv6 router advertisements received

show ipv6 routers

IPv6 static routes

show ipv6 static

IPv6 statistics/traffic

show ipv6 traffic

IPv6 UDP information

show ipv6 udp statistics

IPv6 license string

show license

IPv6 TCP information

show tcp statistics

IPv6 local address pools

show ipv6 local pool

You can use the output filtering feature of the show command to include or exclude lines of output based on a text string that you specify. See JunosE System Basics Configuration Guide, for details.

Related Documentation