Configuring VPLS

This chapter describes how to configure the virtual private LAN service (VPLS) on the router.

The JunosE implementation of VPLS uses features of transparent bridging, BGP, MPLS, LDP, BGP/MPLS VPNs, and layer 2 services over MPLS. We recommend that you have a thorough understanding of these protocols before you configure and use VPLS in your network.

Note: For more information about configuring transparent bridging, see the JunosE Link Layer Configuration Guide. For more information about configuring the layer 2 interfaces that support VPLS, see the JunosE Physical Layer Configuration Guide and the JunosE Link Layer Configuration Guide.

This chapter contains the following sections: