Configuring MPLS

This chapter describes how to configure Multiprotocol Label Switching (MPLS) on the router, and contains the following sections:

• Basic MPLS Configuration Tasks
• MPLS Global Configuration Tasks
• LDP and RSVP-TE Interface Profile Configuration Tasks
• MPLS Interface Configuration Tasks
• MPLS Tunnel Configuration Tasks
• MPLS Tunnel Profile Configuration Tasks
• Configuring Explicit Routing for MPLS
• Additional LDP Configuration Tasks
• Configuring LDP FEC Deaggregation
• Configuring LDP Graceful Restart
• Configuring LDP Autoconfiguration
• Configuring LDP-IGP Synchronization
• Configuring LDP MD5 Authentication
• Controlling LDP Label Distribution
• Additional RSVP-TE Configuration Tasks
• Configuring RSVP MD5 Authentication
• Configuring RSVP-TE Fast Rerouting with RSVP-TE Bypass Tunnels
• Configuring RSVP-TE Hello Messages to Determine Peer Reachability
• Configuring RSVP-TE Graceful Restart
• Configuring RSVP-TE Hellos Based on Node IDs
• Configuring the BFD Protocol for RSVP-TE
• Configuring IGPs and MPLS
• Configuring MPLS and Differentiated Services
• Configuring the Tunneling Model for Differentiated Services
• Configuring EXP Bits for Differentiated Services
• Example Differentiated Services Application and Configuration
• Classifying Traffic for Differentiated Services
• Example Traffic Class Configuration for Differentiated Services
• Configuring Point-to-Multipoint LSPs