Creating Parameter Instances

You can create QoS parameter instances globally, for an interface, or for a subinterface.

Tasks to create parameter instances are:

Creating a Global Parameter Instance

To create a global parameter instance:

Creating a Parameter Instance for an Interface

To create a parameter instance for an interface:

  1. Specify an interface.
    host1(config)#interface atm 11/0.1 host1(config)#interface gigabitEthernet 2/0
  2. Specify the parameter name and the value.
    host1(config-subif)#qos-parameter max-subscriber-bandwidth 6000000

Creating a Parameter Instance for an ATM VP

Use this procedure to attach a parameter instance to a VP on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.

To create a parameter instance for an ATM VP:

  1. Configure the ATM VP.
    host1(config)#interface atm 2/0 host1(config-if)#atm vp-tunnel 4
  2. Do either of the following:
    • Attach the parameter instance to an ATM VP on the interface.
      host1(config-if)#atm-vp 4 qos-parameter max-subscriber-bandwidth 375000
    • Attach the parameter instance and associate with the QoS profile.
      host1(config-if)#atm-vp 4 qos-profile video qos-parameter max-subscriber-bandwidth 375000

Creating a Parameter Instance for an S-VLAN

Use this procedure to attach a parameter instance to a specified S-VLAN ID on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.

To create a parameter instance for an S-VLAN:

  1. Specify the Ethernet interface and create the VLAN.
    host1(config)#interface gigabitEthernet 3/0 host1(config-if)#encapsulation vlan host1(config-if)#interface gigabitEthernet 3/0.1
  2. Specify the S-VLAN ID.
    host1(config-if)#svlan id 1 202
  3. Attach the parameter instance to an S-VLAN ID on the interface.
    host1(config-if)#svlan 202 qos-parameter max-subscriber-bandwidth 6000000

Related Documentation