show ipv6 dhcpv6-local limits

Syntax

show ipv6 dhcpv6-local limits [ interface [ interfaceType interfaceSpecifier ] ] [ filter ]

Release Information

Command introduced in JunosE Release 13.3.0.

Description

Displays the maximum number of IPv6 prefixes available for each ATM interface, VLAN, Ethernet subnet, or POS access interface, or for a particular interface or subinterface from the DHCPv6 local server.

Note:

  • Before you issue this command, you must enable the DHCPv6 local server by using the service dhcpv6-local command.
  • The DHCPv6 local server is not supported over the POS access interface.

Options

Mode

Privileged Exec

Related Documentation