radius vlan nas-port-format stacked


radius vlan nas-port-format stacked

no radius vlan nas-port-format

Release Information

Command introduced before JunosE Release 7.1.0.


Configures the RADIUS NAS-Port attribute to include the S-VLAN ID, in addition to the VLAN ID, for subscribers on Ethernet interfaces. The no version restores the default situation, which does not include the S-VLAN ID.

Note: For subscribers connected over the link aggregation group (LAG) interface in DHCP standalone authenticate mode, RADIUS derives a unique value from the subscriber’s profileHandle and uses the value for the Nas-Port attribute. You cannot use this command to change the value of the Nas-Port attribute.


Global Configuration

Related Documentation