radius nas-port-format

Syntax

radius nas-port-format { 0ssssppp | ssss0ppp }

no radius nas-port-format

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Configures the RADIUS client’s use of a specific format for RADIUS attribute 5, NAS-Port. The NAS-Port format attribute is set only for ATM and Ethernet interfaces. The format is a 4-octet integer in which only the bits representing slot and port are changed. The remaining bits are not changed (8 bits VPI and 16 bits VCI; or 12 bits S-VLAN and 12 bits VLAN). The no version removes the format.

Note: For subscribers connected over the link aggregation group (LAG) interface in DHCP standalone authenticate mode, RADIUS derives a unique value from the subscriber’s profileHandle and uses the value for the Nas-Port attribute. You cannot use this command to change the value of the Nas-Port attribute.

Options

Mode

Global Configuration

Related Documentation