path ds3 t1 loopback

Syntax

path pathChannel ds3 ds3Channel t1 t1Channel loopback
{ local | network { line | payload } }

no path pathChannel ds3 ds3Channel t1 t1Channel loopback

path pathChannel ds3 ds3Channel t1 t1Channel loopback remote
{ line fdl { ansi | bellcore } | payload [ fdl ] [ ansi ] }

no path pathChannel ds3 ds3Channel t1 t1Channel loopback remote

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Configures a loopback for a T1 channel on a DS3 signal. This command applies to a T1 channel on a DS3 over channelized SONET interface. The no version turns off the loopback.

Options

Mode

Controller Configuration

Related Documentation