path ds3 t1 fdl transmit

Syntax

[ no ] path pathChannel ds3 ds3Channel t1 t1Channel fdl transmit
{ path-id | idle-signal | test-signal }

no path pathChannel ds3 ds3Channel t1 t1Channel fdl transmit

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Configures the router to send the specified type of FDL message for a T1 channel on a DS3 signal. This command applies to a T1 channel on a DS3 over channelized SONET interface. The no version stops the router from sending the specified type of FDL message or all FDL messages.

Options

Mode

Controller Configuration

Related Documentation