path ds1 remote-loopback

Syntax

[ no ] path pathChannel ds1 tributaryIdentifier remote-loopback

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Enables acceptance of remote loopback requests at the DS1/E1 over SONET/SDH VT layer on channelized SONET and SDH interfaces. The no version restores the factory default value, which is to reject remote loopback requests.

Options

pathChannel—Number, in the range 1–2147483648, that identifies the path
tributaryIdentifier—Specifier for the tributary in the format
pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
- pathPayload—Payload number for the path; value is 1 for SONET and in the range 1–3 for SDH
- tributaryGroup—Number, in the range 1–7, that identifies the group within the path
- tributaryNumber—Number of the tributary within the tributary group; the value is in the range 1–4 if the tributary type is vt15 or tu11 and in the range 1–3 if the tributary type is tu12

Mode

Controller Configuration