path ds1 fdl transmit

Syntax

[ no ] path pathChannel ds1 tributaryIdentifier fdl transmit
{ path-id | idle-signal | test-signal }

no path pathChannel ds1 tributaryIdentifier fdl transmit

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Configures the router to send the specified FDL message on a DS1 signal. This command applies to a DS1 over channelized SONET or SDH interface. The no version stops the router from sending the specified FDL message or all FDL messages.

Options

Mode

Controller Configuration

Related Documentation